Need help?Do you have a question about the Triumph 2003 Daytona 600 and is the answer not in the manual?
General| Displacement | 599 cc |
|---|---|
| Fuel System | Electronic fuel injection |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Brakes | Dual 310 mm discs, 4-piston calipers |
| Front Tire | 120/70 ZR17 |
| Rear Tire | 180/55 ZR17 |
| Seat Height | 815 mm |
| Dry Weight | 165 kg |
| Rear Suspension | Monoshock, adjustable |
| Rear Brakes | 220mm disc |
| Wheelbase | 1400 mm |
| Fuel Capacity | 18 L |
| Ignition | Digital |
| Frame | Aluminium beam perimeter |
| Front Suspension | 43mm upside down telescopic forks with adjustable preload, compression and rebound damping |
Highlights important warnings, cautions, and notes for safe operation and maintenance.
Essential safety measures related to ignition, health, and environment.
Specific torque values for various engine and chassis fasteners.
Details recommended maintenance intervals based on mileage or time.
Procedures for removal, inspection, and installation of the cam chain tensioner.
Steps for camshaft removal, inspection, installation, and valve clearance adjustment.
Detailed steps for dismantling and reassembling the clutch unit.
Procedures for removing the engine from the frame and refitting it.
Inspection and wear checks for crankshaft journals and connecting rod bearings.
Procedures for piston removal, inspection, and cylinder liner replacement.
Procedures for removal, inspection, and installation of selector shaft, forks, and drum.
Procedures for changing engine oil and replacing the oil filter.
Information on system diagnostics, fault codes, and using the diagnostic tool.
Procedures for draining and replacing the engine coolant.
Instructions for changing fork oil and reference chart for oil levels.
Procedures for checking and adjusting the headstock bearings.
Steps for bleeding brake lines and replacing brake pads.
Wiring diagrams and component identification for starting, lighting, and auxiliary systems.
To Next Page