Triumph Daytona 955i 2002 User Manual

Covers safety measures for systems, substances, fuel, and operational guidelines.

Details on specialized tools and essential technical specifications for servicing.

Specifies torque values for various fasteners and components during maintenance.

Procedures for clutch cable removal, adjustment, examination, and assembly.

Guidance on inspecting clutch friction plates for wear and thickness.

Step-by-step instructions for assembling the clutch components correctly.

Steps for removing and inspecting the engine balancer unit for wear or damage.

Guide for the correct assembly and installation of the balancer components.

Detailed steps for removing and refitting the engine from the motorcycle.

Procedures for crankcase disassembly/assembly and crankshaft servicing.

Steps for piston and cylinder liner disassembly, inspection, and assembly.

Procedures for removing, inspecting, and installing the selector shaft, forks, and drum.

Details on input/output shaft assemblies, starter gears, and sprag clutch service.

Information on engine oil specifications, types, and checking the oil level.

Procedures for changing the oil filter and safely disposing of used engine oil.

Steps for oil pump and sump removal, inspection, and installation.

Procedures for removing and installing the fuel tank and pump.

Steps for removing, inspecting, and installing throttle bodies and injectors.

Information on system diagnostics, fault codes, and using the diagnostic tool.

Explanation of fuel system adaptation procedures and their importance for engine tuning.

Information on coolant types, radiator hoses, and general cooling system checks.

Procedures for draining, filling, and replacing coolant, and servicing the water pump.

Steps for removing, inspecting, and installing the thermostat and radiator.

Details on drive chain lubrication, adjustment, and wear inspection.

Procedures for removing, inspecting, and installing the rear suspension unit.

Steps for servicing the swinging arm, drive chain, and final drive.

Procedures for drive chain lubrication, adjustment, and inspection.

Steps for removing, inspecting, and installing the rear suspension unit and drop links.

Procedures for servicing the drag link and swinging arm.

Steps for removing, inspecting, and installing the final drive hub and bearings.

Details on fork oil changes, level checks, removal, and installation.

Step-by-step guide for dismantling and assembling the front fork components.

Procedures for checking and adjusting the headstock bearings.

Information on fluid level checks, changing fluid, and brake pad servicing.

Procedures for front brake pads, caliper, discs, and master cylinder service.

Steps for bleeding rear brakes, servicing rear pads, caliper, discs, and master cylinder.

Guidelines for tyre pressures, wear inspection, tread depth, and important tyre information.

Procedures for removing and installing the front wheel.

Steps for removing and installing the rear wheel for twin and single-sided swingarms.

Inspection of frame and footrest fixings, and related components.

Procedures for removing and refitting the seat and side panels.

Steps for removing and installing lower fairings and cockpit components.

Procedures for battery removal, refitting, commissioning, and charging.

Information on fuse identification, relays, and servicing the instrument pack.

Details on headlight adjustment, bulb replacement, and rear/indicator lights.

Procedures for servicing the alternator, starter motor, and related components.

Includes electrical circuit diagrams and their corresponding wiring colour codes.