Triumph NT-11 User Manual

NT-11
Two-Post Floor Plate Lift
(11,000 lbs. Capacity)
INSTRUCTION MANUAL
Call 866-563-5438 For Help
1
TRIUPMH AUTO LIFTS
TRIUPMH AUTO LIFTS
TRIUPMH AUTO LIFTS
Do not drill holes in the floor until after you have installed
the cables and hoses and used the floor cover to ensure
your posts are at the correct distance apart.
Do not attempt to preset your anchors in wet concrete. This
is completely unnecessary and has a high possibility of
error that cannot be corrected.

Triumph NT-11 Specifications

General

Brand	Triumph
Model	NT-11
Category	Lifting Systems
Language	English

Summary

Important Notes

General Information and Packing

Covers unpacking, component identification, and packaging details.

Foundation and Anchoring Requirements

Foundation Specifications

Specifies concrete strength, thickness, and site preparation for installation.

Anchoring Procedures and Tips

Detailed steps and advice for securely anchoring the lift to the floor.

Installation Instructions

Site Selection and Layout

Guidance on choosing the lift location and marking post positions accurately.

Column Installation

Procedures for installing the main and offside columns.

Power Unit, Cables, and Hoses

Mounting the power unit, routing equalizer cables, and connecting hydraulic hoses.

Lifting Arms and Final Checks

Installing lifting arms, base plate, and performing initial operational tests.

Performance

Lift Operation Procedures

Step-by-step guide for raising and lowering vehicles safely.

Safety Procedures

General Safety Guidelines

Crucial safety protocols to follow during lift operation.

Maintenance Schedule

Maintenance Tasks

Recommended daily, weekly, and yearly checks for optimal lift performance.

Troubleshooting

Common Issues and Solutions

Addresses motor problems, operational issues, leaks, and noise.

Owner/Employer Responsibilities

User Duties for Safe Operation

Defines user duties for maintaining and ensuring safe lift operation.