３
GENERAL INFORMATION
1. Carefully remove the crating and packing materials.
CAUTION! Be careful when cutting steel banding material as items may become loose and fall causing personal
harm or injury.
2. Identify the components and check for damage or shortages.
Please contact your distributor immediately, if any damages or shortages are discovered.
Packing:
* The lift assembly is packaged into two columns as one piece, as shown in (Fig.1).
* Every column comes with its cylinder, carriage, cables & chains, upright, lifting arms, pad with holders, hoses
and drive-over base plate with the hardware box located in one of the columns.
* The electric-hydraulic motor pump is packaged separately and banded to lift.
Fig. 1
Call 866-563-5438 For Help
TRIUPMH AUTO LIFTS
TRIUPMH AUTO LIFTS
TRIUPMH AUTO LIFTS
To Next Page
Loading...
