965
4. Press in the new bearing until the service tool contacts the rocker.
1. T3880629 - Bearing Installer Handle
2. T3880512 - Needle Bearing Installer 7.5mm 3. Needle roller bearing
5. Using the same service tools, fit new seals to the rocker. Make sure the seals, when
fitted, are below the chamfer edge.
Bearings Installation - Drag Link
1. Make sure service tool T3880511 is clean.
2. Assemble service tool T3880629 to service tool T3880511, fully engaging the threads.
1. T3880629 - Bearing Installer Handle
2. T3880511 - Needle Bearing Installer 6.5mm
3. Needle roller bearing
To Next Page
Loading...
