Triumph Rocket 3 GT 2021 - Page 1261

1223
Front Subframe – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Position the front subframe to the motorcycle, fit the lower flanged sleeves and
fixings. Do not fully tighten at this stage.
1. Fixings
2. Flanged sleeves
2. Fit the upper flanged sleeves and fixings. Tighten the upper and lower fixings to 13
Nm.