Triumph Rocket 3 GT 2021 - Page 1268

1230
6. Tighten the M6 x 42 mm fixings to 7 Nm.
1. Fixings M6 x 20mm
2. Fixings M6 x 42mm
3. Starter motor cover
Perform the following operations:
• If fitted with the Triumph shift assist Battery - Installation
• If fitted with the Triumph shift assist Seat - Installation
Radiator Cowl – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.