Triumph Rocket 3 GT 2021 - Page 1327

1289
Battery – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Make sure that the battery terminals do not touch the motorcycle frame.
This may cause a short circuit or spark which would ignite battery gases causing a risk
of personal injury.
1. Fit the battery into the battery tray.
2. Locate the battery clamp to the battery tray and rotate until it positions into the
recess of the battery.
1. Battery tray
2. Battery clamp
3. Battery strap hook
4. Battery strap support