Triumph Rocket 3 GT 2021 - Page 1282

1244
NOTICE
Note the routing of the preload adjuster hose and its retaining clip for installation.
There is a retaining band securing the adjuster hose to the suspension unit's body.
There is no requirement to remove retaining band.
4. Release the fixings, detach and support the rear suspension preload adjuster from
the battery box.
1. Fixings
2. Preload adjuster
3. Retaining band
4. Rear suspension unit
NOTICE
Note the routing of all harnesses within the battery box for installation.
5. Detach the harness clip from the rear subframe front bridge.