Triumph Rocket 3 GT 2021 - Page 1432

1392
Clutch Switch – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Perform the following operations:
• Seat - Removal
• Battery - Removal
NOTICE
The clutch switch is secured to its housing by two fixings. The clutch switch housing is
a press fit to the clutch master cylinder.
Note the orientation of the clutch switch for installation.
1. Carefully detach the clutch switch assembly from the master cylinder.
1. Clutch switch
2. Securing lugs
3. Location holes