Triumph Rocket 3 GT 2021 - Page 1545

1505
Gear Position Adaption and Triumph Shift Assist (if fitted)
Gear Position Sensor
This model is fitted with a hall effect gear position sensor that provides a constant
voltage output ranging from 0.5 to 4.5 Volts. The output voltage is used to determine
which gear is currently engaged.
Voltage Characteristics
The gear position is determined by the following voltage ranges:
Gear
Minimum Voltage
Maximum Voltage
1
0.5 V
0.7 V
N
0.9 V
1.1 V
2
1.3 V
1.5 V
3
2.0 V
2.2 V
4
2.8 V
3.0 V
5
3.5 V
3.7 V
6
4.3 V
4.5 V
The sensor voltage can be read using the Triumph diagnostic tool.
Further Diagnostics
Refer to Gear Position Sensor for details of pinpoint tests relating to diagnostic trouble
codes P0914 and P0917.
Neutral Position Adaption
The motorcycle is delivered from the factory with the neutral position fully adapted.
The neutral position adaption must be reset and re-adapted under the following
conditions:
• If a gear position sensor malfunction occurs (DTC P0914 and P0917, see Gear
Position Sensor).
• The sensor has been removed or disconnected for any reason.
Refer to Neutral Position Adaption.