If Triumph Shift Assist is fitted as standard, the motorcycle is delivered from the
factory with the shift force sensor fully adapted.
If the Triumph Shift Assist has been fitted as an accessory, the Triumph Shift Assist
system must be enabled, and the shift force sensor must be adapted as part of the
accessory kit installation process.
In service, the shift force sensor adaption must be reset and the sensor re-adapted under
the following conditions:
• If a shift force sensor malfunction occurs (DTC P1702 and P1703, see Shift Force
Sensor Circuit (Triumph Shift Assist)).
• The sensor has been removed or disconnected for any reason.
Refer to Shift Force Sensor Adaption (if fitted).
To Next Page
Loading...
