To prevent body damage, do not spill brake and clutch fluid onto any area of the
bodywork or the brake and clutch reservoirs.
Perform the following operations:
• Seat – Removal
• Battery – Removal
• Coolant Expansion Tank – Removal
• Radiator - Removal
Two fixings for the clutch cover finisher will have been removed when the expansion
tank assembly was removed.
Note the position of the remaining fixing for installation.
1. Note the original setting of the clutch lever adjuster in order that it can be returned
to the same position when the bleeding operation is complete. Set the clutch lever
adjuster to position No. 1.
2. Turn the handlebars to bring the fluid reservoir to a level position.
To Next Page
Loading...
