169
Fork Oil Renew – Draining
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Do not change the fork adjustment settings. If they are changed, this will change the
handling of the motorcycle from those which the rider is used to. Riding with
unfamiliar fork settings may cause unexpected handling characteristics leading to loss
of control and an accident.
1. Remove the fork (see Front Forks - Removal).
Never tightly clamp the outer tube as this will cause the tube to permanently
distort. A distorted tube is not serviceable and must be replaced.
2. With the top cap facing upwards, using service tool T3880171 clamp the fork outer
tube, then unscrew the top cap from the outer tube.
T3880171 - Fork Holding Tool
To Next Page
Loading...
