Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Make sure absolute cleanliness when adding brake fluid to the brake fluid reservoir.
Do not allow moisture or debris to enter the cylinder, as this will adversely affect the
fluid properties. Always use fluid from a sealed container and do not use fluid from a
container that has been opened for any period of time. Always check for fluid leakage
around hydraulic fittings and for damage to hoses. A dangerous riding condition
leading to loss of motorcycle control and an accident could result if this warning is
ignored.
Do not allow the fluid level to fall below the lower level mark in the reservoir. If the
fluid level is allowed to fall below this mark, air may enter the system and the
sequence of bleeding must be repeated.
To prevent paint damage, do not spill brake fluid onto any area of the bodywork.
Spilled brake fluid will damage paintwork.
Front Brake Lever Setting
To Next Page
Loading...
