Triumph Rocket 3 GT 2021 - Page 453

425
Connecting Rod – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Perform the following operations:
• Seat - Removal
• Battery - Removal
• Fuel Tank - Removal
• Engine - Removal
• Barrels - Removal
NOTICE
Note the position of the piston alignment mark on the pistons for installation.
1. Mark each piston and cylinder bore with a number to ensure the pistons are fitted
into their original cylinders on installation.
2. Pull the piston and connecting rod assemblies out of the barrel.
3. Remove the piston (see Piston - Disassembly).