Triumph Rocket 3 GT 2021 - Page 516

488
Gear Selector Forks – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
NOTICE
Make sure the input shaft is in neutral, as shown in the illustration below.
1. Fit the selector fork shaft and the three selector forks as noted for removal.
1. Selector fork shaft
2. Selector fork (input shaft)
3. Selector fork (output shaft)
4. Selector fork (output shaft)