Triumph Rocket 3 GT 2021 - Page 562

534
Low Oil Pressure Warning Light Switch – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Perform the following operations:
• Seat - Removal
• Battery - Removal
• Battery Box - Removal
The low oil pressure warning light switch is located at the rear of the cylinder head.
1. Disconnect the electrical connection to the switch.
2. Remove the switch. Discard the copper washer.
1. Electrical connection
2. Low oil pressure warning light switch
3. Copper washer