Triumph Rocket 3 GT 2021 - Page 563

535
Low Oil Pressure Warning Light Switch - Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Incorporating a new copper washer, fit the switch and tighten to 15 Nm.
2. Refit the electrical connection.
1. Electrical connection
2. Low oil pressure warning light switch
3. Copper washer
Perform the following operations:
• Battery Box - Installation
• Battery - Installation
• Seat - Installation