618
Cruise Control Switch Check Function
If the engine is running you will be prompted to turn it off before the test will start.
If the cruise control is turned on you will be prompted to turn it off before the test will
start.
Follow the on-screen instructions to operate and then release each switch in turn.
Crankshaft Position Adaption (European Markets Only)
Signals from the crankshaft position sensor are used by the motorcycle's engine misfire
detection system. In order to accurately detect an engine misfire, the crankshaft position
must be adapted to allow for manufacturing and assembly tolerances.
The motorcycle is delivered from the factory with the crankshaft position fully adapted. If
for any reason the crankshaft position is not adapted, the Malfunction Indicator Light
(MIL) will be illuminated and DTC P0315 will be stored.
In service, the crankshaft position must be re-adapted under the following conditions:
• The MIL is illuminated and DTC P0315 is stored, indicating that the crankshaft
position sensor is not adapted.
To Next Page
Loading...
