Triumph Rocket 3 GT 2021 - Page 854

816
Ambient Air Temperature Sensor – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Perform the following operations:
• Seat - Removal
• Battery - Removal
• Flyscreen - Removal
NOTICE
Note the routing of the harnesses under the flyscreen for installation.
1. Disconnect the two handlebar sub harness and the twist grip position sensor
connectors from the main harness.
2. Release the fixings and detach the low frequency antenna from the flyscreen
mounting.