Triumph Rocket 3 GT 2021 - Page 853

815
Intake Air Temperature Sensor – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Fit the intake air temperature sensor to the plenum base and tighten the fixing to 3
Nm.
1. Fixing
2. Intake air temperature sensor
3. Plenum base
Perform the following operations:
• Plenum - Installation (All Markets Except US) or Plenum - Installation (US
Markets Only)
• Fuel Tank - Installation
• Battery - Installation
• Seat - Installation