Triumph Rocket 3 GT 2021 - Page 93

65
Balancer, Crankshaft and Crankcase
Application
Torque
(Nm)
Notes
Alternator rotor to sprag clutch housing
*
See Starter Drive/Sprag
Clutch - Installation
Alternator rotor to sprag clutch housing
16 Nm
Fit new fixing(s) if loosened or
removed
Balancer adjuster plug
25 Nm
Camshaft sprocket to crankshaft
44 Nm
Fit new fixing(s) if loosened or
removed
Connecting rod bolts
*
See Crankshaft - Installation
Fit new fixing(s) if loosened or
removed
Connecting rod bolts stage 1
50 Nm
Connecting rod bolts stage 2
120º
Crankcase protector
12 Nm
Crankcase tightening sequence
*
See Output shaft -
Installation
Crankcase tightening sequence Stage 1
Bearing cap 1 to 4
10 Nm
Crankcase tightening sequence Stage 2
Bearing cap 1 to 2
32 Nm
Crankcase tightening sequence Stage 2
Bearing cap 3 to 4
12 Nm
Crankcase tightening sequence -
Transmission Cover
*
See Transmission Cover -
Installation
Crankcase tightening sequence Stage 1
Transmission cover 1 to 14
10 Nm