Triumph Rocket 3 GT 2021 - Page 959

921
NOTICE
Note the routing of the switch housing and the twist grip position sensor harnesses for
installation.
21. Carefully remove the handlebar while feeding the switch housing and the twist grip
position sensor harnesses out the handlebar.
1. Harness (right hand switch housing)
2. Harness (left hand switch housing)
3. Handlebar
Handlebars – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Carefully fit the switch housing harnesses into the handlebar as noted for removal.