Triumph Rocket III Manual

91
Maintenance and Adjustment
Unpainted Aluminium Items
Items such as brake and clutch
levers must be correctly cleaned to
preserve their appearance.
Use a proprietary brand of aluminium
cleaner which does not contain
abrasive or caustic elements.
Clean aluminium items regularly, in
particular after use in inclement
weather, where the components must
be hand washed and dried each time
the machine is used.
Warranty claims due to inadequate
maintenance will not be allowed.
Cleaning of the Exhaust
System
All parts of the exhaust system of
your motorcycle must be cleaned
regularly to avoid a deterioration of its
appearance. These instructions can
be applied to chrome, brushed
stainless steel and carbon fibre
components alike.
NOTE
• The exhaust system must be
cool before washing to
prevent water spotting.
Washing
Prepare a mixture of water and mild
soap. Do not use a high alkaline
content soap as commonly found at
commercial car washes because it
leaves a residue.
Wash the exhaust system with a soft
cloth. Do not use an abrasive
scouring pad or steel wool. They will
damage the finish.
Rinse the exhaust system thoroughly.
Ensure no soap or water enters the
mufflers.
Drying
Dry the exhaust system as far as
possible with a soft cloth. Do not run
the engine to dry the system or
spotting will occur.
Classic Cycles Technical Resources

Triumph Rocket III Specifications

General

Compression Ratio	10.0:1
Final Drive	Shaft
Transmission	5-speed
Rear Brakes	Single 316mm disc, 2-piston caliper
Front Tire	150/80 R17
Rear Tire	240/50 R16
Dry Weight	320 kg (705 lbs)
Fuel System	Electronic fuel injection
Exhaust	3-into-1 into 2
Clutch	Wet, multi-plate
Frame	Tubular steel, twin spine
Rear Suspension	Twin shocks, adjustable preload
Front Brakes	Twin 320mm floating discs, 4-piston calipers
Front Wheel	17 x 3.5 in
Fuel Tank Capacity	24 liters (6.3 US gal)
Engine Type	Liquid-cooled, DOHC, in-line 3-cylinder