EasyManuals Logo

Triumph Street Twin User Manual

Triumph Street Twin
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
Maintenance and Adjustment
138
Warning
If tyre damage is suspected, such
as after striking the kerb, ask your
authorised Triumph dealer to inspect
the tyre both internally and externally.
Tyre damage may not always be visible
from the outside.
Operation of the motorcycle with
damaged tyres could lead to loss of
control and an accident.
Warning
Use of a motorcycle with incorrectly
seated tyres or inner tubes,
incorrectly adjusted tyre pressures, or
when not accustomed to its handling
characteristics may lead to loss of
motorcycle control and an accident.
Warning
The ABS system operates by
comparing the relative speed of the
front and rear wheels.
Use of non-recommended tyres can
affect wheel speed and cause the ABS
function not to operate, potentially
leading to loss of motorcycle control
and an accident in conditions where
the ABS would normally function.
Warning
Accurate wheel balance is necessary
for safe, stable handling of the
motorcycle. Do not remove or change
any wheel balance weights. Incorrect
wheel balance may cause instability
leading to loss of control and an
accident.
When wheel balancing is required,
such as after tyre or inner tube
replacement, see your authorised
Triumph dealer.
Only use self-adhesive weights. Clip
on weights may damage the wheel,
tyre or inner tube resulting in tyre
deflation, loss of motorcycle control
and an accident.
Warning
Tyres and inner tubes that have been
used on a rolling road dynamometer
may become damaged. In some cases,
the damage may not be visible on the
external surface of the tyre.
Tyres and inner tubes must be
replaced after such use as continued
use of a damaged tyre or inner
tube may lead to instability, loss of
motorcycle control and an accident.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Street Twin and is the answer not in the manual?

Triumph Street Twin Specifications

General IconGeneral
Engine TypeLiquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Displacement900 cc
Bore x Stroke84.6 x 80 mm
Compression Ratio11.0:1
Max Torque80 Nm @ 3, 800 rpm
Fuel SystemMultipoint sequential electronic fuel injection
Final DriveChain
ClutchWet, multi-plate assist clutch
Gearbox5-speed
FrameTubular steel, twin cradle
Front Tire100/90-18
Rear Tire150/70 R17
Dry Weight198 kg
Wet Weight216 kg
Fuel Consumption4.1 l/100 km
CO2 Emissions93 g/km
Max Power65 PS (64 bhp) @ 7, 500 rpm
ExhaustBrushed 2 into 2 exhaust system with twin brushed silencers
Front Suspension41mm forks
Rear SuspensionTwin shocks with adjustable preload
Front BrakesSingle 310mm disc, Nissin 2-piston floating caliper
Rear BrakesSingle 255mm disc, Nissin 2-piston floating caliper
Front WheelCast aluminium alloy, 18 x 2.75 in
Rear WheelCast aluminium alloy, 17 x 4.25 in
Seat Height765 mm
Fuel Tank Capacity12L
Width (Handlebars)780 mm
Wheelbase1450 mm
Rake25.1 °
Trail102.4 mm

Related product manuals