EasyManua.ls Logo

Triumph TR2 - Fractional and Metrical Equivalents

Triumph TR2
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GENERAL UPKEEP-Lubrication
The container should not be disturbed until cartridge renewal is required
;
as the accumulated dirt on the outside of the container may fall inside
and thus be carried into the bearings when the engine is re-started.
Ignition Distributor
(see Fig.
5)
Every 6,000 miles (10,000 km.), the cam
(B)
should be smeared lightly
with engine oil.
A
pronounced squeak occurs when the cam is quite dry.
Withdraw the moulded rotor arm from the top of the spindle and apply a
few drops or
thin
machine oil around the edge of the screw
(A)
to
lubricate the cam bearings and distributor spindle.
At
the same time, place
a single drop of clean engine oil on the pivots
(C)
and
(D).
Fig.
5.
Ignition distributor.
Water
Pump
There is one nipple
provided (see arrow,
Fig. 6) to which
the grease gun
should be applied
every 6,000 miles.
(10,000
km.).
Give
five strokes only
with
the
gun.
Fig.
6.
Water
pump
lubrication.
15
SPORTS
CAR

Other manuals for Triumph TR2

Related product manuals