BODY
Q.
REAR
WINDOW
LIGHT-TO
FIT
manindate the
inner
rubber
lip
into posi-
(See Fig.
7)
ti0n.l Using a special tool
bee
Fig.
7)
Wy
secure the glass by feeding the
filler
Fit the rubber
mould in^
around the &ss strin into uosition. With the aid of a
with
the filler section sytioned toward; the
otP"
"
sAeelastik
&
",
complete the installation
rear of the
m.
er
the glass with the by forcing Sealastik compound
between
the
rubber attached, to the aperture in the
cc
Hard Top
"
and the outer lip of the
cTIard Top" and with the help of an assistant
glazing
rubber to effect water sealing.
To Next Page
Loading...
