(3) Check/top up brake fluid reservoir
I.
Check fluid level against mark on side
of
reservoir.
If
topping up
is
necessary:-
2.
Wipe
clean the reservoir cap and
sur~ounding
area.
3. Remove the reservoir cap.
4. Add fluid to bring
level
above danger mark on side
of
reservoir.
WARNING:
Use
only new fluid
of
the
correct specification.
Do
NOT use fluid
of
unknown origin,
or
fluid that has been exposed
to
the atmosphere,
or fluid that has been discharged during bleeding
operations.
5.
Replace reservoir cap.
6.
Remove any spilled fluid with a clean cloth.
CAUTION: Paintwork can be damaged by direct contact
with brake fluid.
(4) Check/top up clutch fluid reservoir
I.
Wipe
clean the reservoir cap and surrounding area.
2. Remove the reservoir cap.
3. Check fluid level against
mark on side
of
reservoir.
4.
If
necessary, add fluid to bring level up to mark on
side
of
reservoir.
WARNING:
Use
only new fluid
of
the correct specification.
Do NOT use fluid
of
unknown origin,
or
fluid that has been exposed to the atmosphere,
or
fluid
that
has been discharged during bleeding
operations.
5.
Replace reservoir cap.
6. Remove any spilled fluid with a clean
>:loth.
CAUTION: Paintwork can be damaged by direct contact
with clutch fluid.
Triumph
TRh
Manu;'11. P<ln
!",.
545~77
h~u~
J
.'
2
/
MAINTENANCE
MT
26990
10.00(JS
To Next Page
Loading...
