Triumph TR6 PI - Page 34

(12) Check/adjust/report condition of distributor points
See 86.35.14.
(13) Renew distributor points
See 86.35.13
(14) Check/adjust ignition timing
See 86.35.16
(IS) Check/report ignition wiring for fraying, chaffing and
deterioration
Low tension circuit.
1. Check exposed wiring between coil and ignition
switch.
2. Check ignition coil connections.
3. Check wiring between
coil and distributor.
4. Check distributor external connections.
5. Remove distributor cap and check internal wiring.
6. Check internal distributor connections.
7. Replace distributor cap.
High tension circuit.
8. Check lead between coil and distributor.
9. For each sparking plug in
turn:-
Check lead between plug and distributor.
10. Check high tension lead connections.
II. Report wiring condition.
(16) Check condensorand coil for breakdown on oscilascope
tune
Using proprietary electronic testing equipment
I. Check distributor condensor performance.
2. Check ignition coil performance.
Triumph TR6 Manual. Parl No. 545277 Issue 1
8
MAINTENANCE
10
5.6 N1'20JJ
10.00.09