Triumph TR6 PI - Page 38

(28) Check/adjust carburetter settings
See 19.15.02
(29) Overhaul carburetter
See 19.15.18.
(30) Change fuel filter
See 19.25.01
(31) Check fuel system for leaks
1. Check-for leaks from fuel system connections.
2. Check fuel pipes for fractures and damage.
3. Check for leaks from fuel tank(s), pump and
carburetter(s)/metering distributor.
On vehicles fitted with an evaporative control system,
additional checks are given under 17.15.0
I.
(32) Lubricate accelerator linkage/pedal fulcrum and check
operation
I. Lubricate accelerator linkage on
carburetter(s)/metering distributor, using an oil can.
2. Wipe away surplus oil from linkage.
3. Check for roughness
in linkage operation.
4. Lubricate accelerator pedal fulcrum, using an oil can.
5.
Wipe away surplus oil from pedal fulcrum.
CAUTION: Surplus oil on the pedal fulcrum can cause
staining
of the carpet.
6. Check carburetter/metering distributor throttle
response to initial movement
of the accelerator pedal.
If adjustment is necessary - see 19.20.05
7. Check carburetter/metering distributor throttle
position with accelerator pedal fully depressed.
If adjustment is necessary - See 19.20.05.
MAINTENANCE
~
~
Triumph TR6 Manual. Part No. 545277 Issue I
10.00.13