(43)
Lubricate all grease points except hubs
Suspension upper ball joint
1.
Wipe
clean the sealing plug and surrounding area
2. Remove plug and fit a suitable grease nipple.
3. Apply a grease gun until grease exudes from the joint.
4. Remove grease nipple and replace sealing plug.
5.
Wipe
away surplus grease.
Inner drive shaft universal joint
1.
Wipe
clean the grease nipple and surrounding area.
2. Apply a grease gun and
give
5 STROKES ONLY.
3.
Wipe
away surplus grease.
(44) Lubricate steering rack and pinion
1.
Wipe
clean the plug and surrounding area.
2. Remove the plug.
3. Fit a suitable grease nipple to the plug hole.
4. Apply a grease gun to nipple and stroke for 5 times
only.
CAUTION:
Over
greasing can cause damage to the
rubber bellows.
5. Remove grease nipple.
6. Refit plug.
7.
Wipe
away surplus grease.
(45) Lubricate handbrake linkage and cables
1. Lubricate handbrake pivot.
2.
Smear
grease around handbrake lever cable
connections, working it
well
into the clevis pin.
3. Smear grease around brake drum cable connections,
working it
well
into the clevis pin.
4. Grease exposed sections
of
inner cable to resist
corrosion.
MAINTENANCE
I.
IL
3
MT281SS
~
~
Triumph TRh l\h1nui.l1. PUrl Nll.
545~77
Issue
I
10.00.17
To Next Page
Loading...
