(49) Check security
of
suspension fixings, tie-rod levers,
steering unit attachment and steering universal
joint
coupling bolts.
Check security
of
I. Suspension fixings,
2.
Tie-rod levers,
3. Steering unit attachment,
4. Steering universal joint coupling bolts.
(50) Check security
of
propeller shaft and drive shaft
universal coupling bolts
1.
Check security
of
propeller shaft coupling bolts,
which if correct should
be
tightened
to
26 to 34 Ibf ft
(3·6 to 4·7 kgf m).
2. Check security
of
half shaft to final drive unit
coupling bolts, which
if
correct should be tightened
to
26 to
34lbf
ft
(3·6 to 4·7 kgf m).
(51) Check security
of
sub-frame or body mountings
Using
page
06
as
aguide
1.
Check security
of
sub-frame mounting bolts/nuts.
1-
_
MAINTENANCE
~-
__
~
NT2~7IA
(52) Check/report condition
of
steering unit/joints for
security, backlash and gaiter condition
1.
Check security
of
steering unit mounting and steering
joints, using
page
06
as
a guide.
2. Check steering for backlash.
3. Check condition
of
steering gaiters.
4. Report any defects found.
(53)
Adjust front hubs
See
60.25.13
(54)(55) Check/adjust/report front and rear wheel
alignment with tracking equipment.
Front wheel alignment -
See
57.65.01
Rear wheel alignment -
See
64.25.17
Triumph
TR6
Manual.
Part
NQ.
545277 Issue 1
10.00.19
To Next Page
Loading...
