MAINTENANCE
(60) Check visually and report depth
of
tread, cuts in tyre
fabric, exposure
of
ply
or
cord structure, lumps or
bulges
For each road wheel and spare wheel:-
I. Check tread depth, which if correct should show I
mm
(0·039 in)
of
tread (excluding wear bars) over three
quarters
of
the breadth for the entire circumference
of
the tyre.
WARNING:
It
is
illegal in the U.K. to
use
a car
of
this type
fitted with tyres that have a tread depth below this
minimum or tyres
on
which the tread
is
worn level
with the wear indicator bars.
Check for
2. Cuts
in
the tyre fabric.
3. Exposure
of
ply or cord structure.
4. Lumps or bulges on tyre circumference.
S.
Lumps, bulges or other damage on tyre walls.
WARNING:
It
is
illegal in the U.K. to use a car fitted with
tyres in a damaged condition.
(61) Check/adjust tyre pressures (including spare wheel)
With all tyres at ambient temperature:-
I.
Remove protective dust cap.
2.
Using a tyre pressure gauge, tested for accuracy,
check tyre pressure.
Recommended tyre pressures for the different
tyr~
types that may
be
fitted
are
shown on page 04-3
3. Adjust tyre pressure
as
necessary.
4. Replace dust cap or renew
if
missing.
WARNING:
It
is
illegal in the U.K. to
use
a car with the
tyres inflated
to
a pressure that
is
not suitable for the
use
to which the vehicle
is
put.
10.00.22
5
Triumph TR6 Manual. Part No. 545277 Issue 1
To Next Page
Loading...
