(58) Check security
of
road wheel fastenings.
Disc
Wheels
For
each
wheel
in
turn:-
I.
Check tightness
of
road wheel securing nuts, which
if
correct should be tightened to 60 to 80
lbf
ft
(8'3 to
11'1 kgfm).
Wire
Wheels
For
each
wheel
in
turn
1.
Visually check that adaptor
is
fitted on the correct
side.
2.
Remove
road
wheel-
See 74.20.01.
3. Check tightness
of
the adaptor securing nuts, which if
correct should
be
tightened to
55
to
65
lbf
ft (7'6 to
9"0
kgfm).
4. Replace road wheel - See 74.20.01 ensuring that the
centre nut
is
correctly secured.
(59) Check that
tyres are
in
accordance with manufacturers
specification
For
each
road
wheel
and
spare
wheel:-
1.
Check that tyres are
in
accordance with vehicle
manufacturers recommendations for type and size
anq report any deviation.
2. Check for mixing
of
cross ply and radial ply tyres and
report
if
both types
are
present on the vehicle
(including spare wheel).
WARNING:
It
is
illegal
in the
U.K.
and highly dangerous to
mix
cross ply and radial ply tyres on the same axle
or
to fit radial ply tyres to the front wheels only.
Triumph
TR6
Manual. Part
No.
545177 Jssue I
3,-----ffl~)
MAINTENANCE
10.00.21
To Next Page
Loading...
