105
Maintenance and Adjustment
The spring pre-load adjusters are located at
the top of each fork.
To change the spring pre-load, rotate the
adjuster clockwise to increase pre-load, or
counter-clockwise to decrease pre-load.
Always count the number of clockwise turns
from the fully counter-clockwise position and
set both forks to the same settings.
Note:
• For Speed Triple and Speed
_Triple_r the motorcycle is
delivered from the factory with
the spring pre-load set at 7
clockwise turns from the fully anti-
clockwise position.
Rebound Damping Adjustment
Speed Triple
1. Rebound damping adjuster
The rebound damping adjuster is located at
the top of each fork.
To change the rebound damping force, rotate
the slotted adjuster clockwise to increase, or
counter-clockwise to decrease. Always count
the number of counter-clockwise turns from
the fully clockwise position and set both forks
to the same settings.
Note:
• The motorcycle is delivered from
the factory with the rebound set at
1.5 counter-clockwise turns from
the fully clockwise position.
To Next Page
Loading...
Need help?
General
