6
Before your first ride
Congratulaons, you are about to
experience a great feeling; riding a Trivel!
To ensure you have a pleasant rst ride,
please make sure to follow these simple
instrucons:
1. Read or have someone read to you
this manual’s Safety Warnings and
Riding Basics secons. Only unl these
secons have been fully understood is
it recommended to go for your rst
ride.
2. Adjust the seat, backrest, and
handlebars to the recommended
posion for you. See Adjusng your
Trivel secon to learn how.
3. Proceed to a safety check on the
equipment. See Equipment Safety
check on the following chapter.
You’re good to go! Put your helmet on and
enjoy the ride!
It is strongly recommended that you
choose a private or closed-circuit road
without major inclines or vehicles get
to know how your Trivel handles and
how control components such as the
brakes feel.
Before each ride
Check and ghten handles under the
seat if there’s any movement when
rocking the seat side to side.
Check and ghten the seat post
ghtening set screws in the frame’s
square seat tube if there’s any
movement when rocking the seat side
to side.
Check the parking brake funcon
(Model T350) by pulling the brake
lever and engaging the locking push
pin. Adjust cable tension if needed.
See Adjusng cable tension secon for
instrucons.
Check the front brake funcon by
pulling the brake lever and making
sure there is no movement when
pushing the tricycle back and forth.
Adjust cable tension if needed. See
Adjusng cable tension secon for
instrucons.
Visually inspect the frame and all
components of the tricycle for signs of
damage or material failure. If you
suspect a component is damaged or if
the frame shows a sign of failure (such
as a crack, or permanent
deformon), do not ride the tricycle
before it has been inspected and
assessed by a qualied technician.