Trivel T350 - Seat Height Adjustment

8
Seat height adjustment
To raise or lower the seat:
Model year 2017-2018:
1. Loosen both seat post ghtening set
screws in the frame’s square seat tube
Li and hold the seat up, then:
2. Undo the seat post collar screw and
knob from the inial hole
3. Reposion the seat post collar at the
desired height
4. Screw the bolt and knob back in the
seat post collar
Insert the seat post back into the frame
unl the collar sits on the seat post clamp
upper edge, then:
5. Firmly ghten the seat post ghtening
set screws
Model year 2019:
1. Loosen the frame’s square seat post
clamp handle
Hold the seat up, then:
2. Undo the seat post collar knob from
the inial hole
3. Reposion the seat post collar at the
desired height
Check and reghten the ghtening
screws / handle if needed before every
ride as the natural flexing of the seat
post oen cause them to loosen.
4. Screw the knob back in the seat post
collar
Insert the seat post back into the frame
unl the collar sit
s on the seat post clamp
upper edge, then:
5. Firmly ghten the seat post clamp
handle