TRNDlabs FADER 2 - Additional Safety Considerations

34
31
Do not y near buildings. Do not y over stations, railways or highways. Do not
y near trees, or crowds of people. Do not y in rain, snow, fog, storm, wind or
in unclear weather conditions at night.
Do not approach or lm people without their consent. Be mindful of privacy.
Avoid ceiling fans, hanging light xtures, heating or air conditioning.
• This drone has small parts that may pose a choking hazard. Keep all small
parts and electrical devices out of the reach of children and animals. Pets can
become excited by radio-controlled drones.
• The drone is controlled by radio, therefore it is subject to radio interference
from many sources that are beyond your control. Radio interference can
cause momentary loss of radio control. Always allow a safety margin in all
directions around the drone in order to prevent collisions.
• The controller and the charger are specially designed to charge this model.
Never use other charging equipments.
• Regularly examine the drone and controller for any damage to the plugs,
enclosure, rotor blades, battery covers and other parts. In the event of any
damage, neither the drone nor the controller should be used.
• When cleaning the drone or controller, use a damp cloth and wipe gently.
Avoid using chemicals, it can damage the plastic components.
Additional Safety Precautions
31
Do not y near buildings. Do not y over stations, railways or highways. Do not
y near trees, or crowds of people. Do not y in rain, snow, fog, storm, wind or
in unclear weather conditions at night.
Do not approach or lm people without their consent. Be mindful of privacy.
Avoid ceiling fans, hanging light xtures, heating or air conditioning.
• This drone has small parts that may pose a choking hazard. Keep all small
parts and electrical devices out of the reach of children and animals. Pets can
become excited by radio-controlled drones.
• The drone is controlled by radio, therefore it is subject to radio interference
from many sources that are beyond your control. Radio interference can
cause momentary loss of radio control. Always allow a safety margin in all
directions around the drone in order to prevent collisions.
• The controller and the charger are specially designed to charge this model.
Never use other charging equipments.
• Regularly examine the drone and controller for any damage to the plugs,
enclosure, rotor blades, battery covers and other parts. In the event of any
damage, neither the drone nor the controller should be used.
• When cleaning the drone or controller, use a damp cloth and wipe gently.
Avoid using chemicals, it can damage the plastic components.
Additional Safety Precautions
31
Do not y near buildings. Do not y over stations, railways or highways. Do not
y near trees, or crowds of people. Do not y in rain, snow, fog, storm, wind or
in unclear weather conditions at night.
Do not approach or lm people without their consent. Be mindful of privacy.
Avoid ceiling fans, hanging light xtures, heating or air conditioning.
• This drone has small parts that may pose a choking hazard. Keep all small
parts and electrical devices out of the reach of children and animals. Pets can
become excited by radio-controlled drones.
• The drone is controlled by radio, therefore it is subject to radio interference
from many sources that are beyond your control. Radio interference can
cause momentary loss of radio control. Always allow a safety margin in all
directions around the drone in order to prevent collisions.
• The controller and the charger are specially designed to charge this model.
Never use other charging equipments.
• Regularly examine the drone and controller for any damage to the plugs,
enclosure, rotor blades, battery covers and other parts. In the event of any
damage, neither the drone nor the controller should be used.
• When cleaning the drone or controller, use a damp cloth and wipe gently.
Avoid using chemicals, it can damage the plastic components.
Additional Safety Precautions
32
Battery Safety Instructions
FCC Compliance Information (USA only)
• For the best performance, only use fresh 1.5V Alkaline “AAA” batteries in the
controller.
• Never operate the drone with low controller batteries
• The drone automatically switches off if the rotors are unable to rotate.
Switch the power to restart the drone.
• When not in use, store the drone in the original packaging with the batteries
removed from the controller.
• Always recharge the battery after use in order to prevent it becomes deep
discharged. Make sure to allow a pause of about 20 minutes between
nishing the ight and recharging the battery.
• Even if the drone is not in regular use, recharge the battery occasionally,
suggested at least once every 2-3 months.
• When transporting or temporarily storing the rechargeable battery, the
temperature should be between 5-50 C. Do not store the battery or the
drone in a car and do not expose it to direct sunlight. In case the battery is
overheated it can be damaged or catch re.
• Do not submerge the drone or the controller in water. This will damage the
electronic components and could pose a severe risk to the built-in battery.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including
interference that may cause undesired operation. Changes or modications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.