Wireless Barcode Collector still allows barcodes to be scanned and cached automatically in the
event of occasional outages, for a maximum of about 1000 barcodes at a time. When the
communication is restored, the PDT Series will automatically send the buffered barcode to the
basestation.
PDTSerieswirelessbarcode
collectorwithkeyboardandscreen,allscaninterfacesallowmanual
inputofbarcodes.Press 【F1】 toenterthemanualinputstate,threeinputmodes,numbers,
lowercase letters, uppercase letters, 123 for digital mode, abc for lowercase mode, ABC for
uppercasemode,press 【SW】 toswitchtheinput
methodandpress 【ENT 】 Keytoconfirm,
press 【ESC】 tocancel.
2,USBGun
ThemodelforthehandheldtoconnecttheUSBdatacabletothecomputerorcashregister,the
handheld can be used as a wired scanner, bar code scanning directly to the computer or cash
register.
3,Collect
The mode is non‐real‐time transmission mode, all the barcode
acquisition after mass transfer, the user can choose to export
wirelessorcable.AllscannedbarcodesarestoredinFLASHmemory
inscanorder,andpowerlossdoesnotresultindataloss.
At the same time bar code acquisition
mode can be repeated bar
codefordifferenttreatment,therearethreeways:
(1,donotdealwithrepeatedbarcodes,Savethescannedbarcode;
(2, attention,when prompted to repeat the barcode is skipped or
saved;
(3,prohibitscanningrepeatbarcode, repeatbarcodeunconditional
filter.
4,Inventory
Direct counting is a simple inventory statistics mode, record the
numberofbarcodesandthecorrespondingvalue,canhandle10000
bar codes at a time, the maximum number of a single bar code
999999. After scanning the barcode, the same auto‐accumulation
quantitycanalsobemanuallyinputthequantity
value.Eachtimethe
barcode is scanned, the corresponding quantity of the barcode is
increased by one, or the number of manual counting input can be
directlypressedtobeoverwrittenoraccumulated.
5,Export
Wirelessgundefaultexportformat:B.13
Barcodeacquisitiondefaultexportformat:B.13
To Next Page
Loading...