Adjust the wheel
runners so that
the gap between
the dropside and
the cot end is
less than 3 mm.
For installation of drop side insert the crib drop side
runner into the headboard groove on one headboard end.
Move the second headboard slightly and insert the
drop side runner into the headboard groove.
Gently push the drop side upwards.
Securely tighten all Allen-head bolts.
On the drop side ends there is a pin with a spring. Slide
the pin into the crib side and the swing the drop side
down so that it is securely in position.
Overhang should be
inside cot.
1
1
1
2
2
2
5
5
5
6
6
6
To Next Page
Loading...
