Caulk Application
Caulk the bottom edge of the toilet with a mildew-resistant caulk
designed for indoor bathroom applications. This will help to keep the
bowl in place and give the closet bolts added security and strength.
Wait for 24 hours to dry.
Remote Installation
1. Clean and dry the area where you will place the holder.
2. Install the ribbed plastic anchors at your desired location.
3. Peel the double-sided adhesive at the back of the bracket and stick
it to the selected dry tile or glass strongly and evenly.
4. Wait 15 minutes.
5. Tighten screws into plastic anchors.
6. Open the back cover of the remote and insert batteries.
7. Place the remote on the remote bracket.
support@troneplumbing.com
www.troneplumbing.com
To Next Page
Loading...