Trotec AIRGOCLEAN 110E

Need help?

Do you have a question about the Trotec AIRGOCLEAN 110E and is the answer not in the manual?

Summary

Safety Information

Foreseeable Misuse

Identifies improper uses of the device that are not recommended and could lead to hazards.

Personnel Qualifications

Specifies the required awareness and understanding for users operating the device.

Residual Risks

Highlights potential dangers that may remain even when the device is used as intended.

Device Information and Handling

Device Description

Details the device's function in filtering room air and its components.

Device Depiction

Illustrates the front and rear views of the device with numbered parts.

Behavior in Event of Emergency

Provides step-by-step instructions for handling emergency situations.

Transport and Storage

Transport

Instructions for safely moving the device using its carry handle.

Storage

Guidelines for storing the device in a safe and protected condition.

Assembly and Start-up

Scope of Delivery

Lists the components included in the product packaging.

Unpacking the Device

Steps for safely removing the device and its packaging.

Start-up

Instructions for preparing the device for initial operation, including filter setup.

Device Operation

Control Panel Overview

Overview and meaning of the buttons and LEDs on the control panel.

Switching the Device On

Procedure for powering on the device from standby mode.

Operating Modes

Explains the available operating modes: Automatic, Night, and Ventilation.

Automatic Mode Operation

Details on activating and how the automatic mode functions based on air quality.

Advanced Operation Features

Night Mode

Instructions for activating night mode for quieter, sleep-friendly operation.

Ventilation Mode

How to manually select fan speeds for ventilation mode.

Timer Function

Steps to set the automatic switch-off timer for 1, 2, 4, or 8 hours.

Ionization Function

How to activate and deactivate the ionization function for enhanced air purification.

Control Panel Locking

Instructions for activating and deactivating the control panel lock.

Shutdown and Troubleshooting

Shutdown Procedure

Steps for safely powering down and disconnecting the device.

Available Accessories

Lists recommended accessories and warnings for using unauthorized ones.

Errors and Faults

Common issues, their causes, and troubleshooting steps.

Maintenance and Care

Maintenance Intervals

Schedule for checking and cleaning the device components.

Maintenance and Care Log

A logbook for recording maintenance activities and dates.

Maintenance Procedures

Activities Before Maintenance

Safety precautions to take before performing any maintenance tasks.

Cleaning the Housing

Instructions for cleaning the exterior of the device.

Visual Inspection of Inside

Steps for checking the interior of the device for dirt and dust.

Cleaning and Replacing Filter

Detailed guide on cleaning and replacing the HEPA carbon filter.

Filter and Sensor Maintenance

Filter Replacement Steps

Detailed steps for removing and inserting the prefilter with HEPA carbon filter.

Cleaning the Air Quality Sensor

Instructions for cleaning the air quality sensor and its cover.

Technical Annex and Post-Maintenance

Sensor Cleaning

Final steps for cleaning the sensor lens with a cotton bud.

Technical Data

Specifications and performance data of the AirgoClean® 110 E.

Activities After Maintenance

Steps to take after maintenance, including reconnecting to mains or storing.

The AirgoClean® 110 E is an air cleaner designed for filtering room air to reduce slight and medium contaminations and odors, thereby improving air quality. It features a powerful fan that draws air in from the front, passes it through a filter for cleaning, and then releases the clean air back into the room.

Function Description

The device utilizes a 3-in-1 filter system comprising a prefilter, a HEPA filter, and a carbon filter. The prefilter, made of synthetic fiber, captures large dust particles before the air reaches the HEPA filter. The HEPA filter is crucial for removing bacteria, viruses, pollen, dust mite residue, mold fungus spores, and other allergens from the air. The integrated carbon filter, with activated carbon, effectively removes odors from the air, including those from house dust, pet allergens, cigarette smoke, smog, and particles carrying smells and viruses.

In addition to filtration, the AirgoClean® 110 E includes an ionization function. This feature releases negative ions into the room air, which help to remove pollen, dust, viruses, and bacteria, further enhancing air quality. The device is equipped with an air quality sensor that displays the current air quality and automatically controls the air purification process.

Important Technical Specifications

Model: AirgoClean® 110 E
Air flow rate with HEPA carbon filter:
- Fan stage 1 (low): 54 m³/h
- Fan stage 2 (mid): 101 m³/h
- Fan stage 3 (high): 140 m³/h
- Fan stage 4 (turbo): 205 m³/h
Ambient temperature: -10 °C to 45 °C
Operating range: 10% to 90% RH
Mains connection (adapter): 220-240V~ 50 Hz
Power consumption: 22 W
Nominal current: 0.1 A
Sound pressure level: 56 dB(A)
Dimensions (length x width x height): 358 x 194 x 505 mm
Weight: 5 kg
Minimum distance to walls and other objects:
- Top: 30 cm
- Rear: 30 cm
- Side: 30 cm
- Front: 30 cm
HEPA carbon filter filter efficiency: 99.97%

Usage Features

The AirgoClean® 110 E offers a range of operating modes and controls for user convenience:

Control Panel: The device features an intuitive control panel for operating and controlling its functions.
On/Off Button (21): Switches the device on or off.
Speed Button (20): Allows setting the fan speed in four stages (low, mid, high, turbo). The selected speed is indicated by the Speed LED (19).
Auto Mode: Activated via the Auto button (16), this mode automatically detects air quality using the air quality sensor (5) and adjusts fan speed accordingly. The Auto LED (15) illuminates when active. The air quality LED (8) indicates air quality as green (good), orange (medium), or red (poor).
Night Mode: Activated by the Sleep button (14), this mode generates a quiet air current adapted for sleep. The Sleep LED (13) is dimly lit, and the device operates at fan stage 1. If the light sensor (7) detects dark surroundings in automatic mode, the device automatically switches to night mode.
Timer Function: The Timer button (18) allows setting an automatic switch-off after 1, 2, 4, or 8 hours, indicated by the Hours LED (17).
Ionization Function: Activated by the ION button (12), this function releases negative ions to clean the air. The ION LED (11) illuminates when active.
Locking Function: To prevent unintended operation, the control panel can be locked by simultaneously pressing the Speed button (20) and the Timer button (18) for one second. The Lock LED (9) illuminates, and an acoustic signal confirms activation.
Memory Function: The device saves selected settings for operating mode and fan speed when switched off from standby mode, but not the timer setting. In case of short power failures, it restarts in level 1 of ventilation mode.
Portability: Compact dimensions and a transport handle (4) make the device easy to move.

Maintenance Features

Regular maintenance ensures optimal performance and longevity of the AirgoClean® 110 E:

Filter LED (10): Illuminates when the prefilter with integrated HEPA carbon filter needs cleaning or replacement.
Filter Replacement: The HEPA carbon filter is pre-installed. Users must remove the plastic cover from the filter before first use. The prefilter with integrated HEPA carbon filter (22) should be cleaned or replaced if dirt is detected or at least every 6 months. The HEPA carbon filter is not washable.
Air Quality Sensor Cleaning: The air quality sensor (5) should be cleaned if soiled or if the air quality LED (8) remains red for an extended period. This involves cleaning the sensor cover and lens with a soft, lint-free cloth and a slightly moistened cotton bud.
Housing Cleaning: The device housing can be cleaned with a soft, damp, lint-free cloth. Abrasive cleaners, solvents, or alcohol-based cleaners should not be used.
Internal Inspection: Periodically, the inside of the device should be visually inspected for dirt after removing the air filter. A vacuum cleaner can be used to remove thick layers of dust.
Safety Precautions: Before any maintenance, the device must be switched off, and the mains plug disconnected from the socket. Work on electrical components should only be carried out by authorized specialists.
Disposal: The device should not be disposed of with household waste. It must be returned to designated collection points for electrical and electronic equipment to facilitate recycling and prevent environmental harm.