EN 10
Operating manual – humidifier B 400
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
• Switch the device off.
• Hold onto the mains plug while pulling the power cable out
of the mains socket.
Warning of electrical voltage
Tasks which require the housing to be opened
must only be carried out by authorised specialist
companies or by Trotec.
Cleaning the housing
Clean the housing with a soft, damp and lint-free cloth. Ensure
that no moisture enters the housing. Protect electrical
components from moisture. Do not use any aggressive cleaning
agents such as cleaning sprays, solvents, alcohol-based or
abrasive cleaners to dampen the cloth.
Visual inspection of the inside of the device for dirt
1. Remove the cover grilles (see chapter Cleaning the water
tank).
2. Use a torch to illuminate the openings of the device.
3. Check the inside of the device for dirt.
4. If you see a thick layer of dust, clean the device interior
(see chapter Cleaning the device interior and evaporation
mats).
5. Refit the cover grilles.
Cleaning the water tank
The water tank should be cleaned at least once a year.
Before a longer period of non-use or storage the water tank
should be drained.
1. Remove the cover grilles at the air outlet.
FAN SPEED
Air Humidifier
HYGROSTAT
1
2
0
2. Remove the drum incl. evaporation mats from the device.
FAN SPEED
Air Humidifier
HYGROSTAT
1
2
0
To Next Page
Loading...
Need help?
General
