Trotec B 5 E User Manual

EN 9
humidifier B 5 E
Operating elements
24
25
31
28
29
30
26
27
No. Designation Description
24 Light button Switching the blue water tank
illumination on or off
25 Timer button Switching the timer function on or off
26 Humidity button Setting the relative room humidity
27 On/Off button Power button:
Switching the device on or off
28 Ionizer button Switching ionization on or off
29 Sleep button Switching on night mode
30 Auto button Switching automatic mode or baby
mode on
31 Mist button Setting the nebulizer intensity
Switching the device on
1. Make sure that the tank has been filled with drinking
water.
2. Make sure that the device is neither damp nor wet on the
outside. Otherwise wipe it dry.
3. Press the On/Off button(27).
ð The device starts to humidify. Fine water mist leaves the
mist nozzle(14).
4. You can rotate the mist nozzle(14) 360° to adjust the
outlet direction of the water mist.
Info
Do not remove the water tank during operation.
Otherwise, the device will continue operation and
water mist may be sprayed out uncontrollably and lead
to unintentional precipitation of moisture around the
device.
Controlling humidification
The desired room humidity can be set to 40%, 50%, 60% or
OL (continuous humidification regardless of the room humidity).
1. Press the Humidity button(26) until the desired room
humidity is displayed.
ð The desired room humidity flashes on the segment
display(17) for approx.5s.
ð Then, the current relative room humidity is shown on
the segment display(17) again.
ð The desired relative room humidity is set.
Setting the nebulizer intensity
The nebulizer intensity can be set in manual humidification
mode. The default setting is level2.
The nebulizer intensity can be set to 3levels:
• level1 = low nebulizer intensity
• level2 = medium nebulizer intensity
• level3 = high nebulizer intensity
1. Press the Mist button(31).
ð The current nebulizer intensity flashes on the nebulizer
intensity indication(16).
2. Press the Mist button(31) again until the desired nebulizer
intensity is set.
3. Wait until the nebulizer intensity indication(16) stops
flashing and dynamically indicates operation again.
ð The desired nebulizer intensity is set.
Setting the operating mode
Manual humidification
The device always starts in this operating mode. The current
room humidity and nebulizer intensity are shown on the display.
The desired relative room humidity can be adjusted at any time
in this operating mode. The setting options
are 40%, 50%, 60% or OL (continuous humidification
regardless of the room humidity).
The nebulizer intensity can be adjusted at any time in this
operating mode.
• If the current relative room humidity is lower than the
desired relative room humidity, the device humidifies the
air with the selected nebulizer intensity.
• If the current relative room humidity is equal to or higher
than the desired relative room humidity, the device
humidifies the air at nebulizer intensity level 1.
• If OL is selected, the device humidifies the air with the
selected nebulizer intensity regardless of the current
relative room humidity.

Trotec B 5 E Specifications

General

Brand	Trotec
Model	B 5 E
Category	Humidifier
Language	English