Trotec BP2F Operating Manual

6 EN
food thermometer BP2F
Temperature measurement with temperature probe
Caution
Risk of contamination of product being measured!
Disinfect the probe before using it in food. Use a
disinfectant suitable for stainless steel and food.
1. Fold out the temperature probe(7).
2. Insert the temperature probe into the material to be
measured by approx. 1 cm.
ð The currently measured value is indicated.
ð The probe temperature indication (15) appears on the
display.
Note
The temperature probe is not suitable as an ice pick
and should never be pricked into frozen objects
forcefully to prevent damages to the device.
Changing the unit °C / °F indication
The default setting for the temperature unit is °C.
Please proceed as follows to change the temperature unit at the
device:
1. Press the SET button (6) five times until the °C/°F
indication flashes.
2. Press the Scan(4) or LED(5) button to set the desired unit.
3. Press the SET button(6) again to save the setting.
Setting the alarm limits
1. Press the SET button(6) once until the upper alarm limit
indication(16) flashes.
2. Press the Scan(4) or LED(5) button to set the upper alarm
limit.
3. Press the SET button(6) again.
ð ON or OFF will flash in the measurement value
indication(13).
ð The indication for the upper alarm limit (16) flashes.
4. Press the Scan(4) or LED(5) button to enable or disable
the upper alarm limit.
ð ON indicates that the upper alarm threshold is enabled.
ð OFF indicates that the upper alarm threshold is
disabled.
5. Press the SET button(6) again.
ð The indication for the lower alarm limit (17) flashes.
6. Press the Scan(4) or LED(5) button to set the lower alarm
limit.
ð ON or OFF will flash in the measurement value
indication(13).
ð The indication for the lower alarm limit (17) flashes.
7. Press the Scan(4) or LED(5) button to enable or disable
the lower alarm limit.
ð ON indicates that the lower alarm threshold is enabled.
ð OFF indicates that the lower alarm threshold is disabled.
8. Press the SET button(6) twice to exit the settings.
ð The alarm limits and the settings are saved.
Settings overview
SET button Function
Press 1 x Set upper alarm limit
Press 2 x Enable or disable upper alarm limit
Press 3 x Set lower alarm limit
Press 4 x Enable or disable lower alarm limit
Press 5 x Set unit °C or °F

Trotec BP2F Specifications

General

Brand	Trotec
Model	BP2F
Category	Thermometer
Language	English