Need help?Do you have a question about the Trotec PHDS 10-230V and is the answer not in the manual?
Explains warning symbols for electrical voltage, hot surface, and general hazards.
Details required protective gear like head, ear, eye protection, mask, clothing, and footwear.
Keep area clean, avoid explosive atmospheres, use correct plugs, protect from water.
Stay alert, use PPE, prevent accidental starting, dress properly.
Guidelines for tool operation, maintenance, and professional servicing.
Device-specific warnings like eye protection and using the additional handle.
For screwing, drilling; users must read manual.
Symbol for spindle lock prohibition; warnings for electrical, hot surface risks.
Warns about toxic dust, asbestos, utility lines, and flying parts.
Steps to take in an emergency situation.
Illustrates parts, lists scope of delivery, and provides technical specifications.
Presents sound pressure/power levels and vibration emission values.
Information on noise levels, vibration effects, and hearing protection.
Instructions for safely transporting and storing the device.
Steps for unpacking the device and attaching the auxiliary handle.
Steps to rotate and fix the auxiliary handle to the desired position.
Guide on how to safely remove and insert drill bits using the keyless chuck.
How to attach and set the depth stop for precise drilling.
Instruction to plug the device into a secured mains socket.
Advice on drilling in general, metal, wood, and masonry.
Tips for screwing and how to operate the on/off switch.
Steps to lock the on/off switch for continuous work.
How to adjust speed based on material and task.
How to switch between drilling and impact drilling modes.
How to set rotational direction and safely shut down the device.
Lists compatible accessories and their article numbers.
Guide to diagnose and resolve common device malfunctions.
Steps for maintenance before starting, notes on internal parts, and cleaning.
Guidance on proper disposal of the electrical equipment.
General| Power | 650 W |
|---|---|
| Voltage | 230 V |
| Chuck | Keyless chuck |
| Drilling capacity in wood (max.) | 30 mm |
| Drilling capacity in steel (max.) | 13 mm |
| Protection class | II |
| Uncertainty (Sound) | 3 dB |
| Uncertainty (Vibration) | 1.5 m/s² |
| Idle speed (stage 1) | 0 - 1, 100 rpm |
| Chuck Capacity | 1.5-13 mm |
| Vibration emission value screw driving | 2.5 m/s² |
| Impact Rate | 0 - 48, 000 bpm |
| No-load Speed | 0 - 3, 000 rpm |
| Idle speed (stage 2) | 0 - 3, 000 rpm |
To Next Page
