Need help?Do you have a question about the Trotec PHDS 11-20V and is the answer not in the manual?
Overarching safety advice for power tool operation and maintenance.
Wear appropriate PPE, stay alert, use common sense, and maintain proper balance.
Secure grip, use auxiliary handles, ensure insertion tool is clamped, and avoid overreaching.
Minimize vibration exposure and wear hearing protection during impact drilling.
Use specified chargers/batteries, prevent shorting, avoid damage/overheating, and follow charging instructions.
Wear protective gear for dust/substances, use insulated grip for wiring, and secure workpiece.
Respect drill bit speed limits and start drilling at low speed with proper pressure.
Use the tool only for specified applications; avoid drilling natural stone.
Users must read and understand instructions, especially the Safety chapter.
Essential PPE includes hearing protection, eye protection, protective mask, gloves, and clothing.
Warnings cover electrical shock, short circuits from liquids, explosive substances, and toxic dusts.
Warnings address asbestos, hitting utility lines, and dangers from untrained personnel.
Provides vibration and sound values according to EN 62841-2-1 standards.
Warning of electric shock from insufficient insulation. Check device for damages before use.
Troubleshooting guide for issues like battery not charging, device not starting, or poor drill bit penetration.
General| Power Supply | Battery |
|---|---|
| Voltage | 20V |
| Battery Type | Lithium-Ion |
| Max Torque | 35 Nm |
| Drilling Capacity in Wood | 30 mm |
| Drilling Capacity in Steel | 10 mm |
| Idle speed (1st gear) | 0-400 rpm |
| Max. torque (soft) | 15 Nm |
| Max. torque (hard) | 35 Nm |
| Battery voltage | 20V |
| Battery capacity | 2.0 Ah |
| Chuck size | 10 mm |
| Chuck capacity | 10 mm |
To Next Page
