Need help?Do you have a question about the Trotec PSCS 11-3,6V and is the answer not in the manual?
General| Battery Voltage | 3.6 V |
|---|---|
| Battery Capacity | 1.5 Ah |
| No-Load Speed | 200 RPM |
| Battery Type | Li-Ion |
| Torque Settings | 6 |
| Bit Holder/Chuck Size | 6.35 mm (1/4") |
| Charging Time | 3-5 h |
Keep work area clean, well-lit, and free from children/bystanders.
Use correct plugs, avoid earthed surfaces, protect from wet conditions.
Stay alert, use PPE, prevent unintentional start, maintain balance and footing.
Proper tool usage, switch function, adjustments, storage, and maintenance.
Charger/battery compatibility, heat/object avoidance, damaged battery risks.
Ensure service by qualified personnel with identical replacement parts.
PPE, securing workpiece, tool blocking, insulated grips, storage lock.
Use for screwing/loosening screws with Trotec accessories.
Device is not intended for drilling operations.
Users must read and understand the safety instructions.
Always wear eye protection and a dust mask for safety.
Shock risk, liquid penetration, specialist work, plug handling.
Battery explosion, toxic dusts, asbestos, hitting utilities.
Flying parts, untrained use, packaging, heat sources, vibration hazards.
Improper storage damage, rotational direction, torque settings.
Features integrated bit magazine and LED work light for ease of use.
Lists the items included in the scope of delivery.
Detailed technical data including voltage, torque, weight, and sound/vibration values.
Steps before transport, Li-ion battery regulations, packaging needs.
Steps before storage, battery discharge, environmental requirements.
Steps to unpack the device and check for completeness and damage.
Instructions for charging the battery, expected time, and handling precautions.
Interpreting LED indicators for battery status.
Steps to select, remove, and insert bits using the tool magazine.
Instructions for filling the bit magazine with up to six 25 mm bits.
Tips for tool fit, using centre lock, and pre-drilling guidance.
How to change rotation direction and perform a test run.
Steps to switch the device on/off and details on the integrated brake.
Steps for turning off, cooling, tool removal, cleaning, and storage.
List of compatible accessories and their article numbers.
Guide for smoke/odour, charging, and start-up issues.
How to resolve issues where the on/off switch cannot be pressed.
When to contact customer service or seek repair for persistent problems.
Safety checks before maintenance and cleaning procedures for the device and bits.
Detailed steps for safely removing the battery from the device.
Guidelines for environmentally sound disposal of electrical equipment and batteries.
Information regarding compliance with EU directives and harmonised standards.
Details of the manufacturer, address, and contact information.
To Next Page