Need help?Do you have a question about the Trotec PTNS 10-230V and is the answer not in the manual?
Symbols indicating the need for safety glasses, gloves, and ear protection.
Covers maintaining clean work areas, electrical safety precautions, and personal alertness during operation.
Details on wearing appropriate PPE such as eye, hearing, and body protection for safe operation.
Specific safety advice for tacker handling, preventing unintentional firing, and proper usage.
Details the approved materials and ground surfaces for tacking with the device.
Warnings about electric shock from damaged insulation, damp conditions, and component work.
Step-by-step guide on how to load staples and wire nails into the tacker's magazine.
Advice on applying the device firmly, using caution on soft workpieces, and checking fastener levels.
Steps to check if the device does not start, including power connection and fusing.
Procedure for safely removing a jammed staple or wire nail from the device.
General| Power Consumption | 400 W |
|---|---|
| Number of Needles | 19 |
| Uncertainty K (Sound) | 3 dB |
| Uncertainty K (Vibration) | 1.5 m/s² |
| Voltage | 230 V |
| Power | 400 W |
| Needle Diameter | 3 mm |
| Operating Voltage | 230 V |
| Sound Pressure Level | 92 dB(A) |
To Next Page
